Cb0178-12 load data.

12 GAUGE LITE Hull: AA-HS or any Remington (DO NOT use any Federal -- too much internal volume.) Shot Weight/Size: 3/4 oz. No. 9 (Actual average dropped, 315 gr.) Powder: 15.8 gr. Alliant Promo MEC Powder Bushing: No. 27 Primer: Fiocchi 616 (209), W209 or STS209 Wad: Claybuster CB0178-12 (Clone of the gray WAA12L and the best wad for this shot ...Claybuster 0178 7/8 oz wads. I use these to load 24 gram shotshells (slightly lighter than 7/8 oz). Using Remington STS hulls and xx.x grains of Clay Dot powder produces about 1310 fps and 7800 psi. This is a very light recoil load that powders sporting clays targets out as far as 70 yards (with the right chokes).The 24 gram loads are OK with CB1100-12 in the Winchester or Remingtion hulls, but the crimps are much better with the CB0178-12 wad. 700-X with the published 24 gram data from Hodgdon works great, never had a problem with it being dirty. I have used a lot of 700-X over the 45 years I have been reloading.I was thinking of reducing powder drop on the Alliant Extra-Lite recipe, but given the low pressure results for the 1,150 f/s published load, I think I will be risking squib loads with Extra-Lite trying to get to 1,000 f/s territory. Does anyone have a suggestion for an alternative recipe using Gun Club hulls and CB0178-12 wads?

The Ultimate Reloading Manual. With our load data you can search by caliber, bullet weight, powder, powder manufacturer or a combination of all four. Search over 311,644 loads! Metallic Search. Shotgun Search.Claybuster Shotshell Wads 12 Gauge CB0178-12 (Replaces WAA12L) 7/8 oz Bag of 500 Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or …

Detailed Description. Claybuster CB3118-12A FIG8 White wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading.The load: Remington STS or Winchester AA hulls. 7/8 ounce #8-1/2 shot. 16.1 to 16.3 grs. Titewad. WAA12L or CB0178-12 wad. Remington STS or Winchester 209 primer. I've not bothered to check the velocity or pressure of this load, but Hodgdon lists a 16.9 gr. Titewad load as producing 1250 fps @ 8,200 psi.

The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. Technical Information: •Replaces the Winchester WAA12L •Optimal Load: 7/8 oz •Intended as an economical wad replacement for target and wing shooters •Wads are made with 100% prime resin for consistency These are the best wads to use for ...RAM is used for storing loaded programs and the data programs use. It stands for “random access memory” and constitutes the working memory of a computer. RAMs main advantage is its...The good thing about these loads is the velocity and the shot weight are both low. For the 7/8 oz, I use Clays and the gray wad in 12 gauge. But the velocity of most published 7/8 oz loads is higher than for the 3/4 oz above and for the mininum velocity 1 oz loads. So I generally load the slower 1 oz loads.STD 209. CB2100-12. 1350. Remarks: 11400 psi. 2 3/4" Remington STS reloading data with 16 loads. with weights of 7/8 ounce,1 ounce. powders manufactured by Accurate.

Use the CB0178-12 wads with APP loads. Still load 3/4 oz of shot. Use the slightly shorter wad to offset the greater volume of powder. Link to comment Share on other sites. ... 7/8 oz. #7-1/2 shot, Claybuster CB0178-12 wad, and Clay Dot powder in STS hull at 1000 FPS. ...

GRAY 7/8 OZ. 24GR. 500PK

I did find RamShot Competition, and use their 7/8-oz load data to load 3/4-oz loads. Load: Rem-STS 12 / Win209 / 21.0-gr Comp / CB-0175 / 3/4-oz hard #8-1/2. Competition is a spherical powder, meters very well in my equipment, and the load data will support heavier shot loads by using a different wad. No dished crimps, easy to transition …CB0078-16 Reloading Data ~ 7/8 Ounce Shot Loads. J-Ron Inc.'s Claybuster Wad Line is a well established economical wad line built for target-shooters and wing-shooters alike. With twenty-one different models from which to choose, the Claybuster Wad Line can satisfy nearly every target or wing shooting application for reloading.CB6118-12 Load Data 1 1/8 ounce and CB6100-12 Load Data 1 ounce good luck, garrisonjoe Click to expand... He has these: FIOCCHI WAD 12ga 1-1/8oz STRAIGHT WALL 250/BAG - Graf & Sons Designed for straight walled hulls (Federal, Rio, Estate, Cheddite). Available in 2 configurations- 1 oz and 1-1/8 oz. Bag of 250 Wads2 Winchester WAA12L: CB0178-12, DR XXL Pink, MEC78T4. Winchester WAA12F114: CB1114-12, DRA-12 Yellow Winchester WAA20: CB1078-20. Winchester WAA28: CB1034-28, Red Duster Winchester WAA28HS: CB5034-28HS. ... LOAD DATA FOR MUZZLELOADER RIFLES - Blackhorn 209 www.blackhorn209.com. Volumetric Units (volumetric powder measure) 80 100 120 Weight in ...Lots of room to work for 1.25oz of bismuth and 25+ grain Longshot. I usually load 27.5-29grain. I think the low pressure loads were targeting a niche in the loading community. Using components that are available now while introducing a new wad is a good move IMO. FWIW- That 28 grains of Longshot looks like a solid load. With twenty-two different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading. For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester. Optimum load is 7/8 oz. Claybuster Wads. Burnt Powder. If all you have is a 12 ga and you want 3/4 oz loads your options are limited, There are far better combinations of components for loading 3/4 oz loads in the 28 ga than in a 12 ga. Just like there are far better components available to load 7/8 and 1 oz loads in the 12 ga than in the 28. Just how it is.

Optimum load is 3/4 oz. Featuring Lead-in Taper . CB0178-12 (WAA12L) For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or …CB0178-12 (WAA12L). For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester. Specifications and Features: REPLACES WINCHESTER WAA12L. Check your reloading manual or go to a powder manufactures website for load data. WARNING: This product contains chemicals known to the State of ...CB 1100-12: 20.5: 6,900----7/8: 1,310: Rem 209P: Green Dot: TGT12 or DR RT12: 22: 7,100----7/8: 1,200: Rem 209P: Promo: CB 4100-12B: 17.5: 7,100----7/8: 1,250: Rem 209P: Promo: CB 4100-12B: 18: 7,400----7/8: ... 5.The shotshell loads in this booklet are for use with LEAD SHOT ONLY! 6.Use only the brands of powder and components shown in our ...Find load data for Accurate No. 2 propellant by clicking the button "Loads for this Powder". Accurate No. 2 is an extremely fast burning, double-base, spherical handgun powder suitable for use in a wide range of handgun calibers. Low recoil and low flash make No. 2 well suited for use in short barrel, concealed carry applications.The more appropriate wads for your 3/4 oz. loads are Claybuster's CB0178-12 clone of the ridiculously overpriced gray WAA12L or Down Range's XXL Pink. All three mentioned are dedicated 7/8 oz. wads and will work very well with 3/4 oz. loads, but the latter two have slightly narrower base diameters and are specifically for non-straight-walled hulls.The proper 7/8 Claybuster wad is the CB0178-12 (grey wad) I load: 7/8 oz of #9 shot Remington STS or Gun Club Winchester 209 primer Claybuster CB0178-12 Wad 17.1 Grains of Clays Love this load, and shoot 1000's of them.

The breaks looked a lot better than the cb0178-12 and my barrels looked a lot better too (less wad fouling). ... Here is a link to Claybusters load data for their 3/4 oz 12 ga wad. I shoot 80% of my skeet practice with the 3/4 oz …Shotshell Reloading Press: $96.98. $66.12 increase decrease. Add to cart. Add to wishlist. Compare product. Email a friend. Availability: In stock. Products specifications. ... 12 GA 7/8 OZ Gray CB0178-12 743491001780. Claybuster Shotshell Wads - 12 GA 7/8 OZ Gray $19.42 $11.91. Add to cart Add to compare list Add to wishlist.

With shot prices rocketing into the stratosphere, this load is about as economical as you can get and still reliably break targets with the same effectiveness of a 7/8 or 1 oz. payload: 12 GAUGE PROMO LITE. HULL: AA-HS or any Remington (No Federals -- too much internal volume.) SHOT WEIGHT: 3/4 oz.Then it might clean up, but it is much better with 1 1/8 oz. loads. I wouldn't worry about the hulls looking a bit black. I really don't care how long hulls last, but maybe you do. 700-X with 1 oz. loads in Winchester hulls work well. This one is right off the Hodgdon website. Winchester AA HS hull Winchester 209 18.0 Grains 700-X CB1100-12 wadClaybuster CB1114-12 WAA12F114 wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading. For use in 1-1/8 to 1-1/4 oz. loads.CB 0178-12: 17.6: 9,330----7/8: 1,150: Win 209: Extra-Lite: Rem TGT 12: 14.5: 7,460----7/8: 1,200: Win 209: Extra-Lite: Rem TGT 12: 15.5: 8,700----7/8: 1,250: Win 209: Extra-Lite: …The Ultimate Reloading Manual. With our load data you can search by caliber, bullet weight, powder, powder manufacturer or a combination of all four. Search over 311,644 loads! Metallic Search. Shotgun Search.2 Winchester WAA12L: CB0178-12, DR XXL Pink, MEC78T4. Winchester WAA12F114: CB1114-12, DRA-12 Yellow Winchester WAA20: CB1078-20. Winchester WAA28: CB1034-28, Red Duster Winchester WAA28HS: CB5034-28HS. ... LOAD DATA FOR MUZZLELOADER RIFLES - Blackhorn 209 www.blackhorn209.com. Volumetric Units (volumetric powder measure) 80 100 120 Weight in ...Detailed Description. Claybuster CB0118-12 WT Promo wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading.CB 0178-12: 17.6: 9,330----7/8: 1,150: Win 209: Extra-Lite: Rem TGT 12: 14.5: 7,460----7/8: 1,200: Win 209: Extra-Lite: Rem TGT 12: 15.5: 8,700----7/8: 1,250: Win 209: Extra-Lite: Rem TGT 12: 16.5: 9,320----7/8: 1,300: Win 209: Extra-Lite: Rem TGT 12: 17.5: 10,180----7/8: 1,200: Fed 209A: Extra-Lite: Rem TGT 12: 15: 8,410----7/8: 1,250: Fed ...

Claybuster CB0178-12 WAA12L wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-two different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading.

One of my favorite 3/4oz loads uses Claydot: Blue Rio hull. Rio 209 primer. Claydot, 19.0 grains. CB-0175-12 wad. Reload 2-3 times then pitch hulls. As long as you can get decent crimps, most hulls (except for Federal Gold Medal) will work with the CB-0175-12 wad without any filler such as Cheerios, Rice, etc.

CB0178-12, DR XXL Pink, MEC78T4 You could argue about whether they are really the same or not, but at a minimum, they are at least similar. At the kind of pressures they list for the 700X-7/8 ounce loads, similar is plenty good. In fact, a CB0178-12 is real, real similar to an AA12L.Comparable to what's already posted I'm about halfway through my first 8 lbs jug of Clay Dot alternating between 1 oz and 7/8 oz loads using Remington hulls, Nobel primers, and Claybuster wads (specifically CB1100-12, CB0178 and CB4100). I'm averaging drops of 18.2 grains using a MEC 32 bushing.Performs best in tapered hulls, Remington or Winchester. Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. SpecsThe 24 gram loads are OK with CB1100-12 in the Winchester or Remingtion hulls, but the crimps are much better with the CB0178-12 wad. 700-X with the published 24 gram data from Hodgdon works great, never had a problem with it being dirty. I have used a lot of 700-X over the 45 years I have been reloading.2 3/4" Winchester AA Plastic Shells reloading data with 63 loads. with weights of 3/4 Ounce,7/8 Ounce,1 ounce. powders manufactured by Alliant ... CB0178-12: 1300: Remarks: 8,240 psi 7/8 Ounce: Extra-Lite: Alliant: Subscribe: Win 209: CB0178-12: 1150: Remarks ...15172 posts · Joined 2007. #9 · May 13, 2014. I know that chuckie. I shoot that load as well, but with a DR wad. It's a great load. But, nobody should rely on load data given on a discussion web as gospel. They should go by the loading manual or call the powder manufacturer if an unlisted substitution is considered. Larry from Cookeville, TN. I have been loading the CB0178-12 with 13/16 oz. (by volume) and find it to be an outstanding load. Show More Testimonials. To receive additional information: J-Ron, Inc. [email protected]. Customer Service: 800-922-6287. 635 Bob Posey Street. Henderson, KY 42420. Cleaned up the press and studied up on light loads; settled on Clay 13.5-14 gr powder, claybuster CB0178-12 wad (optimum 7/8 oz), and 7/8 oz shot - shimmed the powder bar to drop approx 7/8 oz, ordered MEC #25 bushing and started to load with Win AA hulls (once fired by me).2859 posts · Joined 2013. #10 · Apr 26, 2018. shootingcajun said: I shoot a lot of 7/8 oz. 12 gauge loads for 16 yard trap and 1st shot on trap doubles. Using a Remington STS hull, Winchester 209 primer, 17.1 grains Clays (Mec 30 bushing throws a bit lighter charge but works great), and a WAA12L/CB0178-12 (Grey) wad.Detailed Description. Claybuster CB1078-12 WAA20 wads (500/bag) The Claybuster wad line is an economical wad line built for target-shooters and wing-shooters alike. With twenty-five different models from which to choose, the Claybuster wad line can satisfy nearly every target or wing shooting application for reloading.CB0178-12, DR XXL Pink, MEC78T4 You could argue about whether they are really the same or not, but at a minimum, they are at least similar. At the kind of pressures they list for the 700X-7/8 ounce loads, similar is plenty good. In fact, a CB0178-12 is real, real similar to an AA12L.As a cargo van owner, you know that your vehicle is a valuable asset. You can use it to transport goods and services, but you also need to make sure that you’re making the most of ...

2 3/4" Remington STS reloading data with 24 loads. with weights of 7/8 ounce,1 ounce,1 1/8 ounces. powders manufactured by AccurateHere's a wad that Remington has used in 7/8 ounce 12-ga shells. I don't think the wads are available as a component for use in reloading: The wad petals are stitched at the mouth of the shotcup. As best as I can determine, the depth of the shot cup is 0.650", and the overall length is 1.720". These dimensions are very similar to those of the ...GRAY 7/8 OZ. 24GR. 500PKInstagram:https://instagram. xfinity seasonal hold rulesone piece season 14 voyage 3 dubiowa anesthesia intranetcraigslist cape coral florida cars Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. Wads are essential for shotshell reloading. They fill extra space in the hull to make sure there is no room for the shot and powder to move around.Reloading Data Center |. 1. Select Filter by Cartridge or Powder to get started. 2. Select other category options to refine your search. 3. Select the "Get Load Data" button to view results. Filter By Cartridge Filter By Powder. Rifle. jasper county news bay springs ms99th ave and mcdowell Here are some great places to find load data: Loading manuals from bullet and reloading equipment manufacturers like Hornady, Speer, and Lee. Load data from powder manufacturers like Hodgdon …Shotshell Reloading Press: $96.98. $66.12 increase decrease. Add to cart. Add to wishlist. Compare product. Email a friend. Availability: In stock. Products specifications. ... 12 GA 7/8 OZ Gray CB0178-12 743491001780. Claybuster Shotshell Wads - 12 GA 7/8 OZ Gray $19.42 $11.91. Add to cart Add to compare list Add to wishlist. chesapeake bay bridge tunnel marine weather forecast Shop online for shotshell and metallic reloading supplies, shooting supplies, metallic presses, rifle reloading components, shotshell reloading components, shooting accessories, rifle reloading brass and Bullets. ... Claybuster 12 Ga. WAA12L Replacement Wads 7/8 oz. (500 Wads) Permanent Link to Product Page. 14.84. In Stock Product Number ...The loads have performed well this winter. I've also been using Titegroup/High Gun for 1 oz 12 ga trap loads, again with NS primers. I've also needed CB0178 wads for Rem Gun Clubs and old AACF hulls. The additional shot taking up the volume for the denser powder. I've use CB1100-12, CB8100-12 and DR 7/8 oz Duster wads.Product Overview. Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads. Wads are essential for shotshell reloading.